Lean Desk GuideUSEFUL GEAR FOR SMALL WORKSPACES
← Planning tools
MAP THE REQUIRED CONNECTIONS

Check the ports
against the plan.

Compare selected published limits before choosing a portable hub. Resolve the computer, cables and supported modes separately.

This checks selected published features of two named hubs. It does not test compatibility, actual speeds, charging performance or simultaneous port behavior.

Your required connections

FEATURE CHECK, NOT A COMPATIBILITY TEST

Resolve or change the plan before shopping.

Each model below shows its known feature limits and any unresolved selections. Matching the selected features is a starting shortlist, not a purchase guarantee.

For display modes not represented here, consult the exact manufacturer requirements. Rate ceilings do not add together into a promised total speed.

Read the full hub comparison ↗Investigate a two-display dock path ↗Check the specific power connection ↗
CHECKS STILL UNRESOLVED

Anker 332 USB-C Hub (A8355)

HDMI
One output · listed up to 4K/30 Hz
Data ceiling
5 Gbps listed
Ethernet / card readers
Neither integrated Ethernet nor card readers
Laptop-output ceiling
Up to 85 W under supported conditions
  • Choose the required display arrangement.
  • Choose the data-rate requirement you need to investigate.
  • Choose whether the laptop needs power through the hub.
  • Verify the exact host and the intended cables/supply for the requested arrangement.
Manufacturer requirements ↗
CHECKS STILL UNRESOLVED

Anker 555 USB-C Hub (A8383)

HDMI
One output · listed up to 4K/60 Hz
Data ceiling
10 Gbps listed
Ethernet / card readers
Integrated Ethernet, SD and microSD
Laptop-output ceiling
Up to 85 W under supported conditions
  • Choose the required display arrangement.
  • Choose the data-rate requirement you need to investigate.
  • Choose whether the laptop needs power through the hub.
  • Verify the exact host and the intended cables/supply for the requested arrangement.
Manufacturer requirements ↗

Your entries stay in this page. No inputs are stored or sent to the site. Keep equipment you already own if it meets the actual requirement.

Source and scope

The model presets use Anker’s current A8355 and A8383 specification tables. They describe port presence and published ceilings. The tool does not infer output from a lower-power charger, measure data speed, validate every connected peripheral or identify every supported host mode.

Read the 4K/60 Hz checks, extra-port comparison and pass-through power guide for the complete purchase decision.